For best performance of V.R-3G below points needs to be taken into consideration.
1) The hole in the panel should not be more than 9.5mm.
2) V.R-3G should be mounted with Star washer given along with the product and perpendicularity between the panel and axis of potentiometer should be maintained
3) For applications with extreme vibration please use lock nut assembly which is being supplied on the demand.
||10 ohms to 100kOhms
|Total resistance tolerance.
|| +/-10% (Standard) +/- 5% or +/-2% available on request.
||2 ohm or 0.1% which ever is greater
|Temperature coefficient of resistance
||Maximum 130 ppm / deg. C
|| 3 watt @ 40 deg C, for potentiometer with bush, derate subsequent gang by 15% each.
|Maximum wiper current
||Based on power rating of potentiometer and applied voltage
|Maximum working voltage
||200 Mohms @ 500Vdc
|| 1500Vdc for 1 min @ sea Level
|Effective Electrical angle
|| 275 +/- 15deg
|| upto 70 deg C
|Maximum Number of Gangs
|| Dual, Triple, Four, Five, Six, Seven, Eight, Nine, Ten
| Standard resistance range
|| 10, 25, 50, 100, 250, 500, 1K, 2K, 2K5, 3K, 5K, 10K, 15K,
20K, 25K, 50K, 100K. (Any other values on request)
V.R-3G - Number of gangs - Resistance Value in each gang(from top to bottom) - Shaft length - Any specific Info.
V.R - 3G - Triple - 100k +100k + 100k Ohms - 25mm