For best performance of V.R-1G below points needs to be taken into consideration.
1) The hole in the panel should not be more than 9.5mm.
2) V.R-1G should be mounted with Star washer given along with the product and perpendicularity between the panel and axis of potentiometer should be maintained.
3)For applications with extreme vibration please use lock nut assembly which is being supplied on the demand.
||10 ohms to 33kOhms
|Total resistance tolerance.
|| +/-10% (Standard) +/- 5% or +/-2% available on request.
||2 ohm or 0.1% which ever is greater
| Temperature coefficient of resistance
||Maximum 130 ppm / deg. C
|| 1 Watt @ 40 °C pot with bush, subsequent de-rate by 25%
|Maximum wiper current
||Based on power rating of potentiometer and applied voltage
|Maximum working voltage
||100 Mohms @ 500Vdc
|| 1000Vdc for 1 min @ sea Level
|Effective Electrical angle
|| 265 +/- 15deg
|| upto 70 deg C
|Maximum Number of Gangs
|| Dual.(Others on Request)
| Standard resistance range
|| 10, 25, 50, 100, 250, 500, 1K, 2K, 2K5, 3K, 5K, 10K, 15K, 20K, 25K, 30K
V.R-1G - Number of gangs - Resistance Value in each gang(from top to bottom) - Shaft length - Any specific Info.
V.R-1G-Dual-10k +10k Ohms-25mm